enricoghisla posted a comment on discussion Engineering 🇬🇧

Good morning, i have a problem with an FB, i create VAR inside the block but outside i can't reach them, i can reach only IN/OUT/IN-OUT VAR, do you know which could be the problem? Regard

eschwellinger posted a comment on discussion Engineering 🇬🇧

Please write to 'my question' in the CODESYS Store.

danwoodlock posted a comment on discussion Engineering 🇬🇧

Just adding some info: Today I found this post: https://forge.codesys.com/forge/talk/Runtime/thread/264bd530d4/ followed the steps suggested started with a fresh install of raspbian lite, installed 4.11, and then attempted to import my license update file. I get this when I do: Any help is appreciated.

rmaas posted a comment on discussion Motion 🇬🇧

Thanks for the suggestions! It seems that increasing the value DCInSyncWindow helped, running without error for 1/2 day now.

TimvH posted a comment on discussion Engineering 🇬🇧

Most likely related to the Device Diagnostics functionality. Double click on your device (PLC), go to the tab "PLC settings". Enable the advanced option "Enable diagnosis for devices". Build your application again.

salvadegianluca posted a comment on discussion Engineering 🇬🇧

Hi everyone; I'm building a project in which the drag of the mouse over some controls (or the click event) changes the background color of the control items; this change of color is made with an FB that assignes a color code to the background with MUX command based on the value of an enumerator, this part is perfectly working but, when I'm using a touchpanel instead of a web visu (controlled by a mouse) I get into some issues as it seems that the touch operations are not triggering the MouseEnter...

salvadegianluca posted a comment on discussion Engineering 🇬🇧

Hi everyone; I'm building a project in which the drag of the mouse over some controls (or the click event) changes the background color of the control items; this change of color is made with an FB that assignes a color code to the background with MUX command based on the value of an enumerator, this part is perfectly working but, when I'm using a touchpanel instead of a web visu (controlled by a mouse) I get into some issues as it seems that the touch operations are not triggering the MouseEnter...

mbmik posted a comment on discussion Engineering 🇬🇧

Hi Im trying to setup a Weidmüller WL2000 to run with MODBUS, to get some data from a server. Codesys V3.5 SP20. The issue is, that whenever i attach an ethernet port and add MODBUS Master und also a Slave, codesys will compile the project, but there always seem to be some remaining errors, which or only visible, when setting the messages window to "Pre-Compiled". I tried a lot of stuff to get rid of these errors, but cant find to seem the reason. New installation of codesys, cleaned project, setup...

marcolim posted a comment on discussion Runtime 🇬🇧

[Update]. My issue's solved, I applied the resistors in Pull-down configuration on each digital input. In thus configuration never happened "floating or delaying" acquisition on SoftPLC/Arduino Board.

ByCNC modified a comment on discussion Codesys V2.3 🇬🇧