Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
We are using a beckhoff PLC which is based on codesys.
If we would switch to a different Linux based controller, is it then possible to import the beckhoff project without the need to start all over again?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
You will be able to import the PLC code, but you will have to rework the io configuration and some other specifics.
Anyway, you can download CODESYS for free and try it out and any time: https://store.codesys.com/codesys.html
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
We are using a beckhoff PLC which is based on codesys.
If we would switch to a different Linux based controller, is it then possible to import the beckhoff project without the need to start all over again?
You will be able to import the PLC code, but you will have to rework the io configuration and some other specifics.
Anyway, you can download CODESYS for free and try it out and any time: https://store.codesys.com/codesys.html