Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
ich habe folgendes Problem. Ich möchte mit einer Wago Steuerung Typ 750-8212 und e!Cockpit eine CSV Datei von der MMC Karte einlesen und verarbeiten. Das Programm soll die einzelnen Zeichen der Datei durchgehen und diese dann in ein Array TYP Word schreiben. Ich komme mit der Wago Bibliothek nicht ganz zurecht.
Könnte mir jemand einen Tipp geben wie ich vorgehen soll.
DANKE
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
oder ein Video mit Programmbeispiel zum runterladen (ist zwar V2.3 aber lässt sich ganz leicht auf V3.5 anpassen...hab ich selbst auch schon gemacht) https://www.youtube.com/watch?v=ovTJ5AZY22g
Gruß Chris
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hallo,
ich habe folgendes Problem. Ich möchte mit einer Wago Steuerung Typ 750-8212 und e!Cockpit eine CSV Datei von der MMC Karte einlesen und verarbeiten. Das Programm soll die einzelnen Zeichen der Datei durchgehen und diese dann in ein Array TYP Word schreiben. Ich komme mit der Wago Bibliothek nicht ganz zurecht.
Könnte mir jemand einen Tipp geben wie ich vorgehen soll.
DANKE
Hi,
da gibt's massig Beispiele im Netz.
Probiers mal hier:
https://www.codesys-blog.com/allgemein/ ... erstellen/
oder ein Video mit Programmbeispiel zum runterladen (ist zwar V2.3 aber lässt sich ganz leicht auf V3.5 anpassen...hab ich selbst auch schon gemacht)
https://www.youtube.com/watch?v=ovTJ5AZY22g
Gruß Chris