Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
das wird mit 3.5SP14 für den Raspberry PI (klar man kann nur P2 und P3 und Compute Module3 verwenden)
und den Janz emPC-A/iMX6 released werden.
Aktuell kann man Control Win ( die SPS auf dem CODESYS PC)
und Control Linus SL x86/64Bit (also - Debian/Ubuntu oder ähnliches) Linux mit Multicore betreiben
Grüße
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hallo,
wollte mal Fragen, ob das Multicore Update auch für die Rapsi-Runtime verwendbar ist?
Oder war die vorher schon Multicore?
Gruß
Nils
Hallo Nils,
das wird mit 3.5SP14 für den Raspberry PI (klar man kann nur P2 und P3 und Compute Module3 verwenden)
und den Janz emPC-A/iMX6 released werden.
Aktuell kann man Control Win ( die SPS auf dem CODESYS PC)
und Control Linus SL x86/64Bit (also - Debian/Ubuntu oder ähnliches) Linux mit Multicore betreiben
Grüße
Edwin