Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Nach einem Programmfehler kann ich keine Verbindung zum RPI mehr herstellen. Verbindung über SSH geht. Die bereits beschriebenen Lösungen im Forum helfen mir nicht weiter, hat jemand sonst noch eine Idee?
Besten Dank
Patrick
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
mach bitte mal mit dem Update Tool folgedes:
1. Disable Applikation
2. SPS Stoppen
3. SPS starten
dann solltest du wieder drauf kommen bzw neuen Applikations download machen können.
Grüße
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hallo
Nach einem Programmfehler kann ich keine Verbindung zum RPI mehr herstellen. Verbindung über SSH geht. Die bereits beschriebenen Lösungen im Forum helfen mir nicht weiter, hat jemand sonst noch eine Idee?
Besten Dank
Patrick
Hi,
mach bitte mal mit dem Update Tool folgedes:
1. Disable Applikation
2. SPS Stoppen
3. SPS starten
dann solltest du wieder drauf kommen bzw neuen Applikations download machen können.
Grüße
Edwin
Hallo Edwin
Es geht wieder, bekomme wieder eine Verbindung.
Du bist mein Held! Besten Dank
Beste Grüsse
Patrick