Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Ich bekomme in der Steuerungskonfiguration obige Meldung (siehe auch Anhang)
Projekt/Optionen/Editor/Automatisch formatieren ist angehakt
Ich muß immer 2x Übersetzten dann geht es plötzlich wieder
Wie bekomme ich diese Meldung weg
Mario
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Originally created by: mg
Hallo Leute
Wago 750-880
Codesys 2.3.9.41
Ich bekomme in der Steuerungskonfiguration obige Meldung (siehe auch Anhang)
Projekt/Optionen/Editor/Automatisch formatieren ist angehakt
Ich muß immer 2x Übersetzten dann geht es plötzlich wieder
Wie bekomme ich diese Meldung weg
Mario
Originally created by: Wu Fu
Hallo Mario,
das liegt an der Visu.
Hier wurde der Fehler mal besprochen:
http://www.sps-forum.de/beckhoff-codesys-iec61131/67602-codesys-2-3-9-40-visualisierungsproblem-schluesselwoerter-muessen-gross-geschrieben.html
Schöne Grüße
Daniel