Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Mahlzeit
In dem du das Archiv entpackst und das Projekt öffnest...
Wenn du mit Pfadangaben entpackst, wird alles wieder dahin kopiert wo es auch herkam.
Aber Vorsicht:
Bibliotheken usw... könnten dann auch überschrieben werden.
Gruß Erik
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Ich glaube es geht dabei eher darum dass man eine Datei hat in der alles enthalten ist was das Projekt braucht.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
-
2015-07-10
Originally created by: mg
Danke
Ich programmiere ich das Zeugs schon sooo lange aber ich habe diese Fkt noch nie gebraucht.
Das Problem war daß das in dem Verzeichnisstamm soooo weit drinnen lag, daß ich es nicht gefunden hab.
TROTZDEM DANKE
Mg
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Originally created by: mg
wie öffne ich eigentlich ein erstelltes ARCHIV
Mahlzeit
In dem du das Archiv entpackst und das Projekt öffnest...
Wenn du mit Pfadangaben entpackst, wird alles wieder dahin kopiert wo es auch herkam.
Aber Vorsicht:
Bibliotheken usw... könnten dann auch überschrieben werden.
Gruß Erik
Ich glaube es geht dabei eher darum dass man eine Datei hat in der alles enthalten ist was das Projekt braucht.
Originally created by: mg
Danke
Ich programmiere ich das Zeugs schon sooo lange aber ich habe diese Fkt noch nie gebraucht.
Das Problem war daß das in dem Verzeichnisstamm soooo weit drinnen lag, daß ich es nicht gefunden hab.
TROTZDEM DANKE
Mg